Shop
Pure Power Remanufactured 6.0L Powerstroke Turbocharger F250 F350 – FULLY TESTED Turbo
Description
This is a Remanufactured Turbocharger from PurePower Technologies. The turbo components are derusted and/or washed, inspected and reworked/repaired for reuse. Journal and thrust bearings are replaced 100%. All turbos are fitted with new actuators and solenoids. Balancing is completed using automated two-plane state-of-the-art, OE-level equipment, and corrections are based across the entire operating speed range. 100% End of line Testing Fully built turbos are quality-tested at end-of-line for: ✓ Leaks – housing integrity. ✓ Oil consumption – bearing selection and assembly. ✓ NVH – correct balance. ✓ High-speed test – operating efficiency. Core return is required. Each turbo is shipped with a RETURN tag for convenience. Simply place the turbo in the original box and place the tag on the outside and drop off at any FedEx location or call us and we will schedule a pickup. A $100 credit will be applied to your purchase once DK Engine Parts receives your core.
*WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS*
*TERMS AND CONDITIONS APPLY*
General Inquiries
There are no inquiries yet.
Quick Comparison
| Pure Power Remanufactured 6.0L Powerstroke Turbocharger F250 F350 - FULLY TESTED Turbo remove | VMS Racing BLACK OIL CAP LS1 5.7L in Billet Aluminum Compatible with Pontiac Trans Am Firebird WS6 98-02 1998-2002 remove | FRAM Extra Guard Oil Filter, PH7317 remove | AC Delco 45H2130 Coil Springs, Rear remove | ACDelco PF61E Oil Filter remove | OCC Chopper CNC Mount For 2-Stroke 66CC80CC Gas Motorized Engine remove | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Name | Pure Power Remanufactured 6.0L Powerstroke Turbocharger F250 F350 - FULLY TESTED Turbo remove | VMS Racing BLACK OIL CAP LS1 5.7L in Billet Aluminum Compatible with Pontiac Trans Am Firebird WS6 98-02 1998-2002 remove | FRAM Extra Guard Oil Filter, PH7317 remove | AC Delco 45H2130 Coil Springs, Rear remove | ACDelco PF61E Oil Filter remove | OCC Chopper CNC Mount For 2-Stroke 66CC80CC Gas Motorized Engine remove | ||||
| Image |  |  |  |  |  |  | ||||
| SKU | ||||||||||
| Rating | ||||||||||
| Price | ₹135.99 | ₹25.95 | ₹165.54 | |||||||
| Stock | ||||||||||
| Availability | ||||||||||
| Add to cart | ||||||||||
| Description | Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore | Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore | ||||||||
| Content | This is a Remanufactured Turbocharger from PurePower Technologies. The turbo components are derusted and/or washed, inspected and reworked/repaired for reuse. Journal and thrust bearings are replaced 100%. All turbos are fitted with new actuators and solenoids. Balancing is completed using automated two-plane state-of-the-art, OE-level equipment, and corrections are based across the entire operating speed range. 100% End of line Testing Fully built turbos are quality-tested at end-of-line for: ✓ Leaks – housing integrity. ✓ Oil consumption – bearing selection and assembly. ✓ NVH – correct balance. ✓ High-speed test – operating efficiency. Core return is required. Each turbo is shipped with a RETURN tag for convenience. Simply place the turbo in the original box and place the tag on the outside and drop off at any FedEx location or call us and we will schedule a pickup. A $100 credit will be applied to your purchase once DK Engine Parts receives your core. *WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS* *TERMS AND CONDITIONS APPLY* | Brand New never used or Installed Vision Motor works "LS1 5.7L " Logo Billet Aluminum Oil Cap For: (LS1 5.7L V8 ENGINES) 97-04 Chevy Corvette C5 98-02 Chevy Camaro Z28 SS 98-02 Pontiac Trans Am /Firebird /WS6 2004 Pontiac GTO 05-06 Pontiac GTO 6.0L 99-05 Holden Vehicles Vision Motor works Billet Aluminum Oil Cap is made of High-Quality Aircraft T6061 Billet Aluminum and then Specially Hard Anodized for a Long-Lasting Finish. The Oil Cap also includes a High Quality Rubber Gasket to prevent Leakage. Note: Please note that Emblem is NOT pre-installed on the oil cap. The reason for this is because Oil Cap needs to be installed FIRST. After the oil cap is completely locked into position, the emblem is installed so that it is centered and aligned with the front view of the vehicle. *WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS* *TERMS AND CONDITIONS APPLY* | FRAM Extra Guard oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip technology, FRAM Extra Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles. *WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS* *TERMS AND CONDITIONS APPLY* Find high quality Oil Filters for Jaguar, Volvo, Subaru, Porsche and other brands and auto parts accessories online. |
*WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS*
*TERMS AND CONDITIONS APPLY*
| An ACDelco Professional, premium aftermarket E Oil Filter features a revolutionary design allowing the engine oil filter to function better while being lighter and more easily recycled than traditional filters. This filter fits your GM vehicle, as well as a wide range of other vehicles on the road today. Its unique element design yields more filtering area in a smaller canister. New thermal bonding techniques and non-metallic end caps improve the overall seal as well as remove wasted media rendered non-functional by adhesives used in traditional filters. This can represent as much as 15% of the total media capacity. This premium aftermarket replacement E oil filter is manufactured to meet your expectations for fit, form, and function. *WE HAVE ALL COLOURS AND VARIANTS IN ALL BRANDS* *TERMS AND CONDITIONS APPLY* Find high quality Oil Filters for Jaguar, Volvo, Subaru, Porsche and other brands and auto parts accessories online. | Introducing the OCC Chopper CNC Mount for 2-Stroke 66CC/80CC Gas Motorized Engines—a precision-engineered solution for optimal engine placement on your OCC Chopper Frame. Crafted from lightweight Aluminum, this CNC Engine Mount is exclusively designed for use with our 2-stroke Chinese 66cc/80cc Engine or similar models, ensuring a perfect fit. Experience reduced kit weight and enhanced vibration resistance, thanks to the aluminium construction, providing stability during your rides. The sleek design not only adds an aesthetic touch but also offers a perfect offset to align your drive sprocket seamlessly with the rear one. This mount is a paragon of stability, providing a secure foundation for your engine. Noteworthy for its accuracy, the OCC Chopper CNC Mount offers ample space for customization, allowing easy integration of high-performance parts such as Mikuni and clone carburetors. Elevate your riding experience with this superior-quality CNC mount—a testament to precision engineering and durability. Explore the possibilities of enhanced performance and style with OCC Chopper CNC Mount. | ||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||
| Additional information |
|
|